Phones How to recover a bricked Galaxy Ace 2 to factory settings. Xf maya 2013 x64 keygen free. If your Samsung Galaxy Ace 2 won't boot, or you just want to restore it after a spot of rooting, we've got you covered.
How to enter Samsung Galaxy Ace GT-S5830 Recovery Mode, Hard reset / Wipe, Download Mode and Remove forgotten unlock Pattern.
Recovery Mode Samsung Galaxy Ace GT-S5830
- Turn off the device
- Press and hold Volume UP key + Home Key, while pressing these keys then press and hold Power key for a while
- Release all key when Android or Samsung logo appear then you will see Android System Recovery
- Use Volume keys to select Menu
- Use Power key to Confirm
Download Mode or ODIN Mode
- Turn off the device
- Press and hold Volume Down key + Home Key, while pressing these keys then press and hold Power key for a while
- Release all key when you see ODIN Mode / Download Mode
- Use Volume Up key to continue
- Use Volume Down key to cancel ( Restart the device )
Hard reset Samsung Galaxy Ace GT-S5830 using External Keys ( remove your forgotten pattern unlock )
- In Recovery Mode select wipe data / factory reset
- press Power key to confirm
- select Yes — delete all user data, press power key to confirm
- select Reboot system now to finish hard reset
Hard reset using Settings Menu
- Turn on the device
- Select Apps
- Select Settings
- Select Backup and reset
- Select Factory data reset
- Select Reset device
- Select Erase Everything
- Select Ok
Warning! If you perform a hard reset, make sure to back up important data. The data can not be recovered after perform a hard reset. If you forgot your unlock pattern, It will remove your forgotten pattern unlock.
Virtual serial ports created in VSPD behave as if they were real ports and are taken for the real ones with the serial applications. Virtual serial port driver 7.1 full 2b keygen generator. Via these ports serial applications can communicate with each other and transfer data via virtual null-modem cable.
Tags: download mode, factory reset, hard reset, master reset, Samsung Galaxy Ace GT-S5830 Recovery mode
What is a soft-brick? Your phone boots up but gets stuck at the Samsung logo. Still able to boot into recovery (Home+Power) and download mode (Volume Down+Home+Power). In that case, you are still able to revive your phone using this guide. What is a hard-brick? Your phone won't boot up at all. It will not even charge.
Not able to get into recovery or download mode. Possibly you used ROM Manager, which should NEVER be used on SGA. If you are still able to boot into download mode using a USB jig, then you still stand a chance.
If not, sorry, your phone is dead. Take it to Samsung and act dumb. Guide to unbrick GT-S5830 1. Download these files - Samsung USB Drivers: (if you already have Kies installed, skip this) - ODIN v4.38 from here: - Firmware from here: (choose any according to your region) 2.
Extract the firmware package downloaded from samfirmware.com. If it has a single.tar or.tar.md5 file then see Step A. Otherwise, if you have got two or more (usually four).tar or.tar.md5 files see Step B. Launch ODIN v4.38 b.
Check Auto reboot and Protect OPS check boxes. (Note: Do not check one package option, use this option only when you need to flash a complete rom in one package.) c. Click on OPS button and Load Cooperv1.0.ops file on it. Click on BOOT button and Select.tar (or.tar.md5) file with APBOOT in the name. Click on PDA button and Select.tar (or.tar.md5) file with CODE / PDA in the name.
Click on PHONE button and Select.tar (or.tar.md5) file with MODEM in the name. Click on CSC button and Select.tar (or.tar.md5) file with csc / csc-multi in the name. Leave EFS blank. Turn off your phone. Boot into recovery mode (Home+Power simultaneously).
Navigate using the volume buttons, select wipe data and confirm with Home button. Once done, unplug the battery. Reinsert the battery and boot into download mode (Volume Down+Home+Power simultaneously).
Connect your phone to your PC via USB cable. Once connected in download mode, Odin will say Detected! (see the image below) and then you may press Start button.
I am trying to follow these instructions for my Samsung Galaxy Ace GT-S5830. After factory resetting my phone it is on a boot loop (I think that's what it's called) and will not completely start up - it boots up but gets stuck at the Samsung logo. I have downloaded everything listed, but when I go to 'One Package' in Odin and try to load the.tar.md5 file nothing happens and I can't get any further then that step. I tried downloading a different firmware also, but neither work.
(S5830XWKTQS5830OXXKT4S5830XWKT8HOME.tar.md5 AND S5830BGKT4S5830XECKT4S5830XWKT8HOME.tar.md5). Now, after changing the file name and removing '.md5' the firmware loads, but the program will not recognize my phone and says it's not connected ('Please connect phone!!' ), even though it is in download mode and says 'downloading.' In small yellow letters on my samsung. I have wiped data/factory reset, wiped cache, and yet my computer and Odin will not connect to my phone. Please please help me, I have been reading for hours online and cannot seem to fix my phone. I'm new to all of this so please, plain English would be much appreciated.
Thank you so much! USB Jig is a hardware device that is used for recovering bricked devices, it does not always work but so far is its the last option. Before that you can try to flash fresh firmware via Odin if you can access download mode. Vol down+home+power button starts up the phone in download mode. You don't seem to have any idea what you are talking about, you are mixing up several things, read a bit more, there is lots of information material around, it'll help you sort your phone out.
A dead phone cannot show up on system as an external device, even a live one needs to be plugged into usb and then the user have to start the storage mode from the phone, only then does the card shows up on the computer. If you only want to access your sd card then you can use a card reader. Samfirmware shifted to sammobile.com a couple years ago, try that.